How is the correct generator size determined for a specific property?

Load calculation totals the wattage required by circuits designated for backup power, including startup surge for motors in air conditioners, refrigerators, and well pumps, then matches that demand to generator output ratings.

What fuel source works best for standby generators in this region?

Natural gas offers unlimited runtime through utility service, while propane requires tank refills but operates independently of gas line damage that sometimes accompanies storm events.

Where is the generator positioned during installation?

Units mount on concrete pads outside the building, distanced from windows and air intakes per manufacturer clearance specifications, with drainage ensuring water does not pool beneath the enclosure.

What happens during a power outage after installation?

The transfer switch detects voltage loss, signals the generator to start, waits for the unit to reach stable output, then transfers selected circuits from grid to generator power without requiring homeowner action.

How does installation address southeast Louisiana's extended warm season?

Sizing accounts for air conditioning load during summer outages, since backup power that omits cooling leaves buildings uncomfortable during the region's hottest months when outages frequently occur.

Generator Installation

Northshore Louisiana experiences routine power interruptions during tropical storm systems, leaving homes and small businesses without electricity for hours or days depending on grid damage severity. Generator installation provides planned backup capacity by evaluating your property's electrical load, selecting equipment matched to that demand, and positioning a standby unit that activates automatically when utility power drops. Solagen, LLC completes generator installations across Lacombe and the surrounding region, connecting backup power systems designed for the extended outages common to coastal areas.

Installation begins with calculating which circuits require backup power rather than assuming whole-house coverage suits every property. Essential loads typically include refrigeration, climate control, lighting, water pumps, and medical equipment, though priorities differ by occupancy and building use. The generator must supply sufficient wattage to start and run those systems simultaneously, accounting for motor surge currents that exceed steady operating draw.

Request a generator installation consultation to evaluate your property's backup power requirements and review equipment options.

Installation positions the generator on a level concrete pad outside the building, connects fuel supply lines to natural gas service or a propane tank, and wires the unit to a transfer switch mounted near your main electrical panel. The transfer switch monitors utility voltage and signals the generator to start when grid power fails, then shifts selected circuits from utility to generator supply once the unit reaches operating voltage and frequency.

After installation completes, your generator starts automatically during outages without manual intervention, powers the circuits routed through the transfer switch, and continues running until utility power restores and stabilizes. Refrigerators maintain temperature, HVAC systems manage indoor conditions despite external heat and humidity, and lighting remains available throughout occupied spaces. The system provides preparation rather than interruption response, reducing the scramble that follows unexpected blackouts.

Proper installation accounts for clearance requirements around the generator enclosure, drainage away from the mounting pad, and fuel line routing that avoids interference with landscaping or site grading. Equipment selection considers the building's electrical demand, available fuel sources, and the typical outage duration the Northshore experiences during named storm events.

How is the correct generator size determined for a specific property?
Load calculation totals the wattage required by circuits designated for backup power, including startup surge for motors in air conditioners, refrigerators, and well pumps, then matches that demand to generator output ratings.
What fuel source works best for standby generators in this region?
Natural gas offers unlimited runtime through utility service, while propane requires tank refills but operates independently of gas line damage that sometimes accompanies storm events.
Where is the generator positioned during installation?
Units mount on concrete pads outside the building, distanced from windows and air intakes per manufacturer clearance specifications, with drainage ensuring water does not pool beneath the enclosure.
What happens during a power outage after installation?
The transfer switch detects voltage loss, signals the generator to start, waits for the unit to reach stable output, then transfers selected circuits from grid to generator power without requiring homeowner action.
How does installation address southeast Louisiana's extended warm season?
Sizing accounts for air conditioning load during summer outages, since backup power that omits cooling leaves buildings uncomfortable during the region's hottest months when outages frequently occur.

Backup Power Planned Before the Grid Fails